Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
You can use 3D printing for many different projects. There is a good 3D printer from simple repair to complex artistic efforts and you can’t do with some elbow oil. I’m trying Top 3D printers For a living that allows me to access different sizes machines and I have to try them in a few ways. It usually means to use small models with different levels of complexity and details to put in the population of the printer. Sometimes, I want to do things that make my heart happy.
Since my first visit to Disneyland in California, I loved the fireworks in the castle for the honeymoon. When we live in California, my family was the transition, but since we moved to Virginia, we could not visit any of the parks. I have a chance to try this recently ELEGOO ONANGESTORM GIGARecommend hobbyists a printer for me, but a perfect printer to bring the love of my family to Disney Parks.
Thought
The original idea for this was not surprising, it was a tiktok. Alex Carrao He made a Disney Castle and then used a projector to play a Lehtube video. The goal is to visualize the 3D caliber fortress as one of the fireworks in Disney parks every night. It seemed simple enough and Alex Disney World Castle fits the standard 3D printer bed – about 250 mm and wanted to do it.
My plan was to print the Disneyland’s castle more Disneyland. They look different: one of the fortress of beauty, and I have a connection to the castle in Cinderella and Disneyland. Fortunately, Alex was aware of other people’s choices and prepared 3D models of both castles. So I bought the model and started working in accordance with my vision. The projection video is only the central field of the castle and the model shows the longest in the length, including the most length, including the winds along the edge. These were extremely for the final product, so they have set them off Microsoft and now Defunct, using the 3D builder. Once I had a model I looked like I was, I had to print.
It is difficult to estimate the size of the printer. But it’s great.
It is difficult to describe the Orangestorm Giga 3D printer. The structure is 800 mm (or 31 39 inches 31 – 39 inches 31, 39 in 39) and up to 400 mm to print 400 mm to print. If it were when First declaredI was pleased to try it, although it was very fun to play around, I do not think it is suitable for you, dear reader. It is difficult to work, it takes a lot of care to print properly and is very big for anyone who is not a seminar. It is said that if there is a large space, there are many patience and $ 2,500, can do very beautiful things together.
I started printing a freshly cut model to the point where I thought the printer could deal with work. I measure the original design that will be 700 mm after the end. The file type you used for 3D printing called STL files can scale a good amount, although they can start definition in smaller details. This did not happen here, because the castle is really a free slate because the project’s project is very sparse.
A large macupe was needed a large macer for this to happen
Usually drew more than 85 hours to complete the print. It may seem a long time, but this great model, this great model, 85 hours quickly with the amount of the material he draws. Five years ago, to give you a few context, I printed a mandaloria helmet for 125 hours to print 125 hours and one-fifth of the castle used.
Used a very large material. I have used 3 kilograms of roll Overture Pla Although I set it and Identify Itapillin to 8% Gyroid, almost all rolled. It is heavy, but it feels like no small bump will not break. As installed on the wall, I wanted to be healthy.
Add some pixie powder (spray paint)
I used the Primer Filler two boxes to get the smoothness I want
Needed some preparation work to be ready for the projection. I used an attomous proster filler to smooth any layers of the print. He took two boxes to give the correct tissue without filling in the brickwork. After that, I used two boxes of the stone effect to give a more beautiful look. Remember, I can’t drive dark colors or forcing the castle colors. There should be a blank canvas, but also I want the projector to look beautiful on the wall. The stone color is suitable for a well-installed wall and the rough tissue gives the impression that there is not only 3D-print plastic.
I thought using projector paint to see the fireworks look better, but it is very expensive. The projector was more than $ 100 – it was more than $ 100 – it was more than all of the other materials – therefore it was simply not effective. The projector had to do business.
Projection is key (stone)
The projection is still perfect and I do not think it will be. I still look great, but I’m limited to the technology that really exists to dial the details. I use a small XGi Project called Elfin. It is an old projector, but still entries to YouTube and Android TV and most importantly, it is easy to light and adjust to get the right angles for projection. Finding the right video was as important as it should be necessary to shoot certain criteria:
- Had to be tape over a tripod
- This should be a minimum resolution of 1080p
- People walking in front of could not be
- Can only show the rest, not the rest of the main street
I finally found the correct video after many searches. This Dizfeed Disneyland Forever The video marked all the boxes and became a nostalgic advantage for me. I just watched the video, but the video showed the video, the video, which shows and marries the video, but after marriage. I watched the same show in one of the happiest days of my life and now I started watching on my wall every day.
Elfin has limited key stone options but it’s what I have to work
The next step is to adjust the projector’s image, so it complies with the scale of the 3D print model. I did this by adjusting the key stone adjustment in the projector. All of the The best projectors Allow the projector to adjust the project of the projection because it is placed. You may have seen the image on a screen look more than a square. Keystone fix allows you to solve this issue by removing corners.
For this project, the correction of the keystone, the image allowed the 3D model to the size of the video to fit as closely as possible. The model goes out of the wall, throws shadows behind it and the image may seem beyond attention. You really need to decide what part of the image you want to focus and choose the big window on the front as most of the action takes place. It was necessary to have several projectors who projokes different in different respects to be perfect and perfect for it, but I am happy to have been happy.
How can I better do that?
I think fake clouds underneath to look even cooler
The next steps to develop this project will require a little financial cost. The correction of the projector’s key stone is designed to be simple, but it does not mean it is not as comprehensive as I need. To change it, you need to get a more expensive projector. Another alternative is to use a laptop to adjust video access to adapt. This can work, but it means hiding a laptop behind the ideal projector. I think I can use a raspberry pi instead of a laptop. It would be smaller and I was able to prepare something for 3D printing I will cover everything. Perhaps the shelf looks like the main street?
Finally, I can add some artificial clouds at the bottom to look more pleasant on the wall. The castle hides the point that cannot be seen as floating in the sky, but spreading the bottom of the projected video and looks more natural.
It was so much fun to bring this project together and then reminded me of the first time I entered the 3D print. I wanted a way to express creativity and have fun in my life, and this castle made both. I have fireworks for the most part of the day and I would really have returned volume when I feel nostalgic and remember one of the best nights of my life.
