Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
3D printers testing is a deep process. Printers often do not use the same materials or do not use the same process to create models. To print the 3D printers using the resin and light, I try a plate of slabs and plates. Each has a unique methodology. The main selector I look at:
- Hardware
- Ease of installation
- Wrapped software
- The appearance and accuracy of the articles
- Restoration
- Company and Public Support
A basic test print representing the OG CNET logo, a printer is used to correct the gaps of bridges, accurate forms and handles. There are also small towers to measure the temperature of the 3D printer.
During the test speed, we slices the model using the standard dealer, the machine is sent with its standard settings, and then compare the real-world term in a real-world term in the declaration period. 3D printers often use different slices, and these slices can be savagely because they believe they are completed.
We use it later Prusaslicer To divide the print to the real world time to use the material to print this number, a secondary number that the printer can work, provides us a more accurate number (MM / S), a more accurate number (MM / s).
Each built plate is caused by a certain temperature, so we use it Thermal imaging camera for Android to check how well they are. We put the structure plate to 60 degrees – the most commonly used temperature – wait five minutes to stabilize temperature, and then measured it in six separately. Then we took the average temperature to see how approaching the 3D printer’s advertising temperature.
The test resin requires different criteria, so I use it Ameralabs Standard Test: Print a small resin model similar to a small town. This helps you to determine how well the printer is, how much the printer deals with small parts and exposure to UV in different points in the model.
Using different 3D models, many other anecdote tests also run on each printer to test the longevity of parts, and the machine fights in different shapes.
According to other criteria, I examined him to see how easy it is to support customer surveys and order and setting up. Sets (semi-accumulated printers only), how much and are difficult to the mounting process and are evaluated by how clear the instructions.
