Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Bambu is called the last printer of Labora H2D and it’s not just a 3D printer. They call this “a multifunctional production center” because it can only do more than printing the 3D object. With the right accessories, you can use it as a laser carved or even a vinyl cutter similar to a chrikut. Bambu says that Lab can deliver “comprehensive fictional opportunities through single hardware architecture.” Can a car inside three, can all trade be a good ball? It’s hard to say so far but I like what I see when it comes to the 3D printing part.
Bambu laboratory exploded only two years ago to the 3D print stage, and since then, the consumer turned 3D. From the end X1 carbon to the base A1 Mini ComboBambu was able to create some of the lab Top 3D printers You can buy each price range. This latest release has previously made and gives us more than another growing upgrade. I spent a few weeks with this 3D printer and I can say I like what I have seen so far.
3D printer
As you can imagine, H2D is a good 3D printer. It can even be great. A few weeks I have used created very large prints and zero failures. Business Gorilla Like a photis You can print a surprising way here – although I use a very high layer height, it gives you a lot of space to play up to 320 and 320, 320 mm. In general, the H2D is in both massive and structural territory, so be ready to take a lot of torture. He said that theoretical, hobby can replace a few cars like laser lovers or vinyl cutters, so you can save a place for a long time.
H2D dual nozzles goes beyond what happens with installation. I always hesitate to dual nozzles because one often enters the other way, but the bambu laboratory thought it. When not in use, the left nuzzle leaves off the road and is really covered with a drop stop. This master is a design. Binary Nozzles give you the ability to use different filaments in different temperatures, the previous bambu is struggling to make lab color systems. I use AMS 2 color system in the second in the second, but if you buy another AMS 2, or use an AMS 1, you can use it to print five colors. In fact, Bambu said you could use more than 25 color colors in an H2D, but we have to see if it is economic.
It is very fun to watch the nozzle moving around.
The new AMS has also been improved. Now include environmental controls that can help keep your filament and keep keeping them away from moisture. I haven’t tried this part yet, but from my limited test, actually works like the original AMS that feeds the philaments. I used the fifth nozzle to support using PETG in AMS 2 and worked as charm. I think I want to play more with 3D printing part in the coming weeks. Bambu Laboratory, AMS historically created a special nest for TPU to use it. It’s a nice add-on and shows the thought that enters the new car.
The only 3D print worries are not really about the 3D printer itself, but if you use the laser module as a 3D printer, how much maintenance will be required. You will need fixed care and cleanliness to store 100% because dust, smoke and garbage can interfere in the oily parts of H2D. It is said that H2D is located in the ground to drive as much as possible with a strong extractor and filtration system that works very well.
Bambu Laboratory H2D Combo 3D Printer Features
| Create volume | 350 x 320 x 325mm (max) |
|---|---|
| Hop | All metal (dual nozzle) |
| Nozzle diameter | 0.4mm (optional 0.2, 0.6, 0.8) |
| Maximum nose temperature | 350C |
| Maximum speed | 1.000mm / s |
| Supported material | Pla, Asa, Petg, PVA, TPU and more |
| Philameter Sensor | Yes |
| Camera heater | Yes (65c) |
| AMS color system | AMS 2 |
| Storage | USB port, 8GB internal |
| Valiant | Bambu Studio (matching other slices) |
| Camera | Timelapse, AI detection, top-down |
If everything you want from H2D is 3D printing capabilities then you can get it with AMS 2 starting on March 25 $ 2200. From what I saw, X1 is a good successor of carbon and makes it a force to be added to the additional size and additional nozzle.
Vinyl cutting
The cutting machine is a little slow but accurate.
To be honest, I did not expect a vinyl cutter to be part of H2D. I knew that I had a laser oygaver and I thought H2D would use to cut vinyl, but there is a completely separate module designed to be cut along with a metal cutting mat, which is a soft-grip and tough side. I was pleasantly surprised by how accurate the instrument was cut. I can use myself using it to make small projects when I don’t want to get out Partridge-cutting I have it. There are even a pen adapter for structure and art projects.
It is useful to own three cars in one place, especially if you have a limited location. The H2D Vinyl Cutter is smaller and slow than the current line of Cricut machines, if you do not plan to use products for large bulk runs, eliminates the need. The cutting module is only in the Laser Combo, only $ 10W for 40W and $ 2,800 for $ 2,800, but I am confident that it will also be available as a standalone purchase.
Laser cutting
Both 10W and 40W lasers sounded great. The only real difference is how fast they do. 40W is faster than cutting materials, especially on each side of lasering, especially more materials. H2D makes it very easy to change modules. 3D print should not be taken off; Just slide the laser tool in front of the head. The machine asks which module is closed and to use a setup. It’s good to go after you finish.
I think lasers are as good as any of the hobbyist lasers there when I was cut off from the fire and h2d. Machines like Glowforge will or Xtool f1 All craft can be easily replaced with lasers in H2D by keeping your needs together. The extract is good with a load and a fan’s burden to make sure that a large amount of rubbish and smoke is far from the trash and smoke. There is also a built-in air assistant system to make sure your incision is sharp and less inclined to fires.
The H2D Laser Combo set includes two flavors, 10W and 40W versions and includes a cutting tray, an emergency stop button and cutting module. In addition, a portable air filter is available in addition to an additional. There is a $ 700 bump to jump from the 40W laser to the extreme 40W lasers, but what projects you want to do with it will determine what you need. If you want to cut through materials, 40W is your best bet. If you’re just carving, 10W will work well.
First impressions
In general, H2D is a nice addition to Bambu Pantheon. As a 3D printer, it is what people call; This is bigger – even if some are not as big as Reddit I would like -, faster and more printed options than before. The main 3D print combine can see that it is extremely popular without other production calls and whistles.
Although other companies succeed with this type of car, the popularity of all additional additions is more difficult. I can see people’s workshops with a means of this three, especially your math. The 10W laser combine costs $ 2,800, but can replace three separate cars that can be spent more when taken together. So far, I saw what I saw in H2D, especially in the 3D print part and look forward to receiving full feedback on paper in the coming weeks.
With AMS2, H2D, Laser Combo and Laser Combo and Laser Combo and related writers, in April and June, it is possible to pre-order accordingly.
Yes. Laser Combo, which can use it as a laser carving or digital cutter, but still has several additions to the standard H2D binary-nasal device. Think of as extra extras to add more than a completely different machine to H2D.
There are a 10W or 40W laser module, a 10W or 40w laser module, which hit a large-scale glass of green, print head, a digital cutting module, a few different setup tiles and an emergency stop button on the front of the laser version. Ams 2 also included.
The original AMS from the P and X series will work on H2D along with AMS 2. By using two and AMS 2 right now and a Small PTFE splittingI hope to use three thirds. Splitter will be able to inform you more after arriving.
Surprisingly, the answer is yes. AMS 2 will soon be available on the old 3D printers of the all Bambu Labin, which has a program update. The X series and p series will initially acquire it, but also will get the update in a row and in the coming months. The heat part will require an independent energy supply, but it is also available on the Bambu website.
Lots of things! I think that’s a better question, what can’t cut? As all blue light lasers can clean or wake acrylic or bottle. Both 10W and 40W lasers will cut dark acrylic, fungus, leather and wood and get out of stainless steel.
The biggest difference between two lasers is the time. 40W will cut laser materials and increase something faster than the 10W laser. It is said that if a little extra speed is not worth the price, 10W should be good if the price is up to $ 700.
