Sigma BF hands-on: Minimal to a fault

[ad_1]

Sigma in February Sigma announced that BF. The release of a shutter is a full frame, which is a full frame, which is a stack and three keys, is a changed lens camera. This minimalism is talking to me and felt the potential of the BF. Photography is one of my favorite hobbies and always felt that modern cameras are very complicated. When I get a unit to try Sigma BF, I wanted to love him. Unfortunately, it can be very simple.

It’s all starting from the design. Sigma BF is one of the few unibody cameras in the industry. Aluminum is carved from a tile, a process Sigma takes seven hours to last seven hours. The result is a camera with the quality of any camera I previously used, current fujifilm models with the quality of the fact that X-e3 and X-S20. Now I know what you think: BF is like an ergonomic nightmare. Surprisingly, your hands are not very bad thanks to the two curved edges under the camera trunk.

I tried Sigma BF with 50 mm f / 2 lens from Sigma. I tried Sigma BF with 50 mm f / 2 lens from Sigma.

Igor Bonifacic for Engadget

Again, it is more comfortable to use, a few more comfortable features are more comfortable to use due to the restrictions on its Unibody design. A suitable grip for one would be good, especially when using a sigma as a sigma, he sent me to try me. The BF also loses a hot shoe montage, so the third party is a third party table. The most annoyant, there is only one belted spinning eyelid, so if you don’t want to use a neck belt, you will need someone to adheside the camera tripod installation. I do not own one of these, so I had to walk around the $ 2,000 bf in my hand when I used it. You can imagine how these feelings are.

BF presents a very different fire experience from your typical digital camera. As I mentioned, there are only one shutter, a single dial and three buttons (to turn on the camera, to turn on and off, and have one to review your images and access the flood menu). There is also a touch screen, but you will not know this first, because choosing a focal point, but you will not use it much while taking some options.

A dial of BF is the main way to interact with the camera. To adjust your exposition, press the dial left or right or right to circle with a specific parameter, and then scroll down to pinch levels as much as you want. The second small screen above the dial allows you to adjust those settings without interaction with the main screen.

Proximity of Sigma BF's single management meeting. Proximity of Sigma BF's single management meeting.

Igor Bonifacic for Engadget

Alternatively, you can press BF to the center of the dialee to open the “double layer” menu. As can be seen on behalf of, Sigma organized the most you need in menus in two levels. For example, tell me what you want to spend the camera from matrix to spot metering. This, by pressing the dial down, by sliding one of the exposure settings, after tapping the re-storing center, then pressing the touch screen and give it a thumb to give the spot measurements. Most of the parameters will not need it, it will not be so tedious, but in this worst, Sigma demonstrates where the fire experience with BF is short.

BF is not excellent to capture the escaping moments. Modern cameras are known in most physical control, Sigma BF complicates more than one parameters at the same time. I was most annoyed by the bf when I want to take a fast moving scene.

[ad_2]

Source link

Leave a Reply

Your email address will not be published. Required fields are marked *